Luxice Sensor Automatic Touchless Bathroom Sink Faucet Hot & Cold Mixer Cover Plate Included Faucet, Black - -

Description

Bathroom Touchless Faucet Factory setting sensing distance is 15cm. Put your hand within this distance, water will flow automatically. Remove your hand, water will stop. This motion sensor faucet will make your washing cleaning and convenient. It's a single hole basin faucet. faucet stem length is 70mm. The suitable deck thickness is 25-45mm. stem diameter is 20mm. Suitble deck hole is 20mm-30mm. Faucet is packed with thick foam and color box. You will receive it in good condition with all faucets accessories included: 1x faucet body with deck plate (cover deck holes) 1x control box 1x water mixer valve,brass with check valve 2x 1/2-9/16 water supply pipe, with red and blue mark(red one for cold water, blue one for cold water) 1x 1/2-1/2 water pipe (for mixing water) 4x mounting screws (fix control box on the wall) 1x instruction paper The core valve of the control box is the solenoid valve. The lifecycle of it is 500,000 time on and off. On the top there's the battery case which requires 4AA alikaline battery(not included). Battery can be bought in your local store. Water mixer valve should be connect to the inlet of control box. Install faucet on the basin Fix control box on the wall Connect mixer valve outlet to control box inlet Connect faucet and control box outlet with flexible pipe Sensor signal wire connection Cold water pipe connect to mixer valve inlet(mark blue) Hot water pipe connect to mixer valve inlet(mark red) Pay attention to the interface order of 1 and 2 (many buyers are not propertly faucet due to the reverse direction of the water pipe) It is recommended to use a lithium battery and replace the battery once every 4 months( insufficient power will cause water leakage, induction failure, etc.)

Product Overview