
Share on:
KEENISIC Tiles designs simple Do-It-Yourself solutions for all. Our tiles are designed to stick and stay on walls without any additional adhesives. Some customers use extra adhesive to aid the adhesives further, however, most do not use anything more. Our tiles will stick for as long as you want them to. In order to enhance their adhesiveness please take the following recommendations into consideration: If walls and tiles are cold, the tiles will not stick well. During the winter, the wall temperature is usually lower than room temperature so make sure that your walls are warm. Do not touch the backing glue. Touching the adhesive directly with your fingers could impair the adhesive performance Surface Requirement The tile need to be installed over clean and sleek surface. Please note that rough surfaces such as porous wood, embossed ceramic tiles or textured wallpaper are not suitable to install; NOT all the latex/repainted walls can be installed directly, for latex or repainted wall, the 3M Spray Adhesive is recommended. Tiles should not directly contact with flames, steam or submerse in water. Do not install tiles less than 16 inches away from the top of stove.







