Huepar 3D Cross Line Self-leveling Laser Level 3 x 360 Green Beam Three-Plane Leveling and Alignment Laser Tool, Li-ion Battery with Type-C Charging Port & Hard Carry Case Included - B03CG Pro - -

Description

One 360° horizontal and two 360° vertical planes enable users to cover the floor, wall, ceiling all around the room. You can use the intersection of the laser lines to project reference points and divide surfaces at right angles. Short press operation button to switch the laser line combinations in turn. The three laser lines can be selected individually depends on job site applications. Turn ON the pulse mode: After power ON, short press "P" button to switch ON/OFF the pulse mode. Pulse mode extends the working range up to 200 feet in brighter working conditions when using with Huepar Line Laser Detector When the pulse mode is activated, the laser beams are dimmer, the pressure on eyes is less when working at close range, and the working time can be appropriately extended It is compatible with Huepar LR-6RG / LR-5RG Line Laser Receiver (need to purchase separately) only. Keep the pulse mode on when using with a receiver. This laser tool utilizes the included large capacity of 3.7V / 5200mAh lithium battery and provides up to 8 hours of running time. The lithium battery with the Type-C charging port can be charged separately. Direct input charging: When taking out the battery, the laser tool can be used at the job site by plugged in. Four battery indicators on keypad allow users to know the current battery volume. Charging protection helps prevent from overcharging. 1/4"-20 female thread on the laser level can help to mount it to the tripod or laser mounting pole. 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required. 1/4"-20 and 5/8"-11 mounting threads on the bottom of the bracket for temporary fastening in place or being fixed on tripod or laser mounting pole. Replaceable Protective Cover: The laser windows can be removed and replaced with a screwdriver. Green Target Plate: Increases the visibility of the laser beam. This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability. At the same power, the green laser is twice bright as the red laser, with a working range up to 85 feet (300LUX) of accuracy within ±1/9 Inch at 33 Feet. Designed with the flat top cover, this laser tool projects 360° laser lines for tiling or ceiling installation at 10mm from the wall and ceiling. Huepar PV10 + Bracket is recommended for quick setup in wall and ceiling applications (ASIN: B07X2K3TVW, need to purchase separately) The laser windows can be removed and replaced with a screwdriver. The laser tool is completely covered by TPR soft rubber, which delivers soft touch and stronger protection. The kit comes with a hard carry case bringing much more convenience to carry and store the laser tool. IP54 water/dust resistance ensures you work well in hazardous working conditions.

Product Overview