Cutting Edge Power Magnetic Solar Panel Mount Bracket, 700 lbs Holding Force Mounting Brackets (8): Garden & Outdoor

Description

What's included: Pre-assembled solar panel bracket(s), with stainless steel hardware White plastic shipping spacers (2 per bracket) 1/8" thick steel zinc plated washers with countersunk hole (2 per bracket, for mounting on non-magnetic surfaces such as wood, composition shingles, etc.) Stainless steel M6 bolt(s), washer(s), lockwasher(s) and nut(s) for mounting the bracket to your solar panel (1 set per bracket) 6" Safety tether to prevent brackets from sliding. We recommend 4 brackets per 100w panel, 6 per 200w panel and 8 per 300w panel. If you aren't sure how strong the mounts would hold, we would recommend ordering one to test. Then you will be able to decide if you need additional mounts or if you need to return the one. Please keep in mind that aluminum is not magnetic. However, it can be difficult to distinguish aluminum from steel or galvanized steel sometimes, especially if it's painted. We would suggest testing the surface with a refrigerator magnet. *The mounts are rated for 175 lbs each using the supplied washers. If your sheet metal is thinner, this rating will be reduced. If you have paint between the mounting surface and the magnetic solar panel mount, the rating will be reduced. And lastly, the 175 lb rating will also be reduced if you are mounting on a curved surface, such as a car or truck roof. If you aren't sure if our magnetic solar panel mounts are a good solution for your application, our suggestion is to try them out and if they don't hold up to your expectations, we accept free returns within 30 days. Always use the supplied safety tether. Cutting Edge Power Inc. cannot be held responsible for any damage or personal injury caused by the use/misuse of this product.

Product Overview