ECO-WORTHY Wireless Motor Controller, Wireless Remote Positive Inversion Control Kit for Linear Actuator, Forward Reverse Remote Control System 12V DC - -

Description

Input voltage: 8V - 35V  Output voltage: 8V - 35V   Max Amps: 10A  Fuse/AC adaptor: yes  Prevent back-connect protection: yes  Remote control distance: Less than 328 feet (100M ) On/off power stable voltage: yes Overtime protection: yes Battery size: 12V 23A The Main Controller: 1) Hand control: O is off position. Left side and right side are for corresponding forward or reverse control. 2) Connect to motor item: the positive and negative side are depend on your connecting ways. The Wireless Remote Control: A: press A, the motor will positive forward, it will stop when loosen.     B: press B, the motor will negative turn, it will stop when loosen.             C: press C then loosen, the motor will insist positive forward for 1 minutes, then stop. D: press D then loosen, the motor will insist negative turn for 10 minutes, then stop.   Please connect the two wires of linear actuator to "MOTOR" of the main controller, connect your 12V battery to "POWER" of the main controller. For 2pcs actuators, please wire them IN PARALLEL, then connect the two wires to "MOTOR" of the main controller. Notice: If you use our (ECO-WORTHY) linear actuator, it doesn't need to connect to the M or N stage. Because our linear actuators have pre-installed limiting switches inside. The input voltage should be within 8V - 35V. Please do not let water go inside. Please do not make the positive and reverse turn in a short time. It needs to replace the battery inside the remote controller when the control distance is shorter.(Battery size: 12V 23A) The fuse may be broken when it had no response.

Product Overview