Yottamaster Aluminum Alloy 5 Bay USB3.0 3.5" Hard Drive Enclosure for 3.5 Inch SATA HDD Support 5 x 16TB & UASP,Mac Style Designed for Personal Storage at Home&Office- [PS500U3] : Electronics

Description

Please refer to the picture attached to insert the plug as the indicated direction, or the enclosure won't work properly if the plug is inserted in a wrong direction. Make sure that the flat end of the power connector is facing up. No need to buy different hdd cases for different sizes of hard drive. 2.5" HDD: fixed with 4 screws at the bottom. 3.5" HDD: fixed with 4 screws on both sides. Spare trays are sold separately in a set of six trays, extra screws are provided, Get it at ASIN: B083S8VDQK. Keep your HDD/SSD in normal temperature. Cool all-aluminum enclosure. Air convection cooling duct design. Front and rear with large area cooling holes. 80 mm silent fan speed up convection and rapid cooling. Four indicator lights monitor the status of each disk. Blue light: Power on Blue light flashing: Reading data Red light: Hard drive error Troubleshooting Guide Q: How do i know if one of the hard drive is failed? If one of the drives is damaged/failed, the corresponding indicator will turn red and the enclosure will make a warning sound(beep). Q: How to Replace A Hard Drive? If you want to replace one of the drives in the enclosure with a new one, or one of the drives is damaged/failed, please take following steps: 1. Find the drive(bad one or the one you wanna replace). Eject the enclosure from the computer and then power off the enclosure. 2. Pull out the drive. Format the new drive on another device first. Then insert the new drive to the original position and turn on the enclosure. Q: How to add a new hard drive into the enclosure? 1. Safely eject the enclosure from your computer and then turn off the enclosure. 2. If the drive you want to add is a brand new drive, please format it on another device. Then insert it into the enclosure. Do not change the drive order. Q: Can I connect the device to the computer through a hub? We recommend that you connect the device directly to the computer, as the connection may be unstable through a hub. Q: What are the specification of the fan? The diameter is 80mm, the voltage is 12V, and there is no current limit. 2 PIN. More FAQs, please download the Troubleshooting Guide (PDF) at Product Guides and Documents below.

Product Overview