GasTapper 12V Gasoline Transfer Pump/Siphon UTV's, Boats, Equipment, Vehicles, Gas, Diesel - USA Built - Excellent Tool for Preppers: Automotive

Description

Our GasTapper 12V Standard fuel transfer system moves 32 gallons per hour (half a gallon per minute) continuously. Great for DIY and homeowner use, the GasTapper 12V Standard fuel transfer system moves gasoline and fuels without manually siphoning and helps you to avoid a mouthful of gas! This convenient, case mounted fuel transfer pump comes with all the required lines and fittings to move gas from one gas tank or container to another. The 12V Standard comes with a 15' power cord that connects to a 12V vehicle receptacle. It has an inline switch and a replaceable fuse in the plug base. The GasTapper 12V Standard Fuel Pump has the added ability to transfer fuel out of many standard vehicles*. For best results, lubricate the provided vehicle access line with lithium grease or WD-40 for difficult vehicles -- IT REALLY HELPS! Perfect for use around the home, while camping, filling RVs, servicing small engines, powering generators, and for emergencies. Stored gas goes bad in just a few months. Many gas-powered devices meet an early grave because of gas becoming plasticized, leaving blockages in the fuel system. The GasTapper 12V Standard Fuel Pump uses an automotive fuel pump to help remove fuel and extend the life of your gas-powered devices. Our pump can dry siphon and lift fuel 72" on the suction side, and push another 72" on the output side. The GasTapper 12V Standard Fuel Pump is compatible with gasoline, diesel, bio diesel, blended alcohol fuels & fuel additives. No bearings, electrical contacts, or diaphragms to wear out. The GasTapper 12V Standard Fuel Pump is a great addition to any garage or home! ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Things You Should Know Before Purchasing: California Prop 65 Warning: "This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.” Important Note: Not for use with conventional 110V AC to 12V DC converters (such as automotive battery chargers). This pump has a circuit board inside and requires a high-quality 110V to 12V DC converter designed to operate electronics. Returns: Returnable only if unopened due to federal transportation and hazmat laws. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- *Although we have a greater than 90% success rate in accessing cars and trucks, it may not work on every vehicle. Some vehicles have lips, edges and/or screens that prevent access. Please check our website for confirmed passenger vehicles. We have several videos demonstrating difficult vehicle access. Alternatively, you can pre-test a vehicle with typical ¼ inch plastic refrigerator water supply line found at many home improvement stores. ** We highly recommend flushing the GasTapper after use with Kerosene or diesel if you plan to store it for longer than one month to prevent pump damage. Keep a can handy and use your flush fluid over and over by simply pumping out and back into the container. Patented Hose Clip and Fuel Grade Hose Standard Case 12V Power Cord Fuel Funnel

Product Overview