AGPTEK Aluminum Mini Mist Maker Fogger Water Fountain Pond Fog Machine Atomi, Silver : Patio, Lawn & Garden

Description

1:Please Keep the water level higher then the nozzle 2~3cm/0.8~1.2inch to get the best atomization effect. but also cannot too high than the nozzle; 2:The Atomization Disc is Consumables and its service life is ≥3000 hours, so please keep the water clear and do not drop any essential oil in when using; (water quality deterioration may influence the lifetime). 3:When not using, please wipe clean with a cotton swab in time for avoid corroding product 4:Please ensure that the daily running time is less than 6 hours, otherwise the life of atomizing slice will be shorted. 5:It can only be used in tap water do not use Distilled Water. 6:In order to prevent water from spilling out when using, Please Put It Into a large or deep container. As a safety precaution, Please Do Not put any electric appliance near this item. Specifications: 1. Mist Maker Size: 4.6 cm diameter, 4.2cm tall 2. Material:aluminum 3. Aerosolized amount 300-400ml/H 4. Disc: 1.5cm. 5. Output Voltage: 24V DC. 6. With a US AC/DC adapter 7. Input: 110-250V, 50/60Hz 8. Output: DC 24V, 700mA 9. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter Points for attention: 1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer. 2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted. 3. Don't touch the atomizing slice while the Mist Maker is working. 4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime) 5. Please switch off the power before Movement or maintenance. 6. The atomizing slice is consumable,and its service life is ≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Note: 1.The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles.Please use higher container to prevent water from splashing out.2.Please do not touch the top of atomization when use it, the frequency exceeds the body's normal tolerance range, so you may have a similar feeling of electric shock if you touch it, but this is not electric leakage. 3.If you find that the new product has some water stains or dirt on it, please contact our customers servicePackage included: 1 x Mist maker 1 x AC-DC adapter (US plug) 1. Please keep the power adapter far away from the water when using. 2.After using, please use the brush or towel to clean up for 3.If you find that the new product has some water stains or dirt on it, please contact our customers service

Product Overview