WiFi Extender Booster - 2100 Mbit/s Internet Amplifier with LAN Connection, WLAN Repeater Cover up to 3000 m² for Socket, 5G & 2.4G WLAN Amplifier Access Point, WPS, Compatible with All Devices : Electronics

Description

Step 1：Plug in, switch "ON" button on the side, the lights will all light up Step 2：Wait about 60s, connect WiFi “Repeater-AC-2G or Repeater-AC-5G” Step 3：Log in IP " 192.168.10.1" , enter the password "admin", Click “SET PASSWORD” Step 4：Scan and select your WiFi Step 5：Enter your WiFi password, click “Save Setting” Step 6：Completed setting, reconnect new WiFi “your router name-2G” or “your router name-5G” How to reset:Press the WPS button of the extender for about 10 seconds. When the indicator on the extender goes out, flashes and stays on again, you can restart the setting. FAQ Q1. What's the role of WiFi extender? A: Boosting the range of your existing WiFi and eliminate signal dead zones. Please note that it can't increase your WiFi speed of your router, the wifi speed will be reduced due to conversion loss. Q2. Where shall I place the WiFi extender? A: To find the best location, you can use your cellphone or judge by the led number of the indicator light to find a place where the original Wi-Fi signal (from your router) is good and in the middle between your router and the farthest place you want to extend. Q3. Correct steps to reset the WiFi extender to factory: step1: Unplug and plug in again, wait about 2 minute (wifi extender configure itself process). Wait 2 minute is a necessary step. step2: Then press the circle button for 10s. (if the lights blink all the time, it means reset failed) step3: Wait another 2 minute, then you will find wifi signal on WiFi list.

Product Overview