
Share on:
Product material: all copper material Product voltage: 12V/24V Rated current: 20A Maximum current: 125A Stud diameter: 10mm Switch type: manual rotation Electrical life: 10000 times Step1: disconnect Battery. Step2: determine Negative Cable. Step3: choose Suitable Mounting Position For Switch. Step4: both Kits Have Cable Terminal Ends Needed To Complete Shut-off Switch Installation. Step5: install Switch. On Cars Equipped With A Body Ground Wire, Failure To Route This Wire Through The Shut-off Switch Will Result In A Melted Body Ground Strap When The Starter Is Engaged. (Note: Do Not Attach Positive And Negative Cables To Shut off Switch At The Same Time. Battery Explosion May Result.) Step6:reconnect Battery And Check For Correct Operation. Note: Be Sure Ignition Switch Is In Off Position Before Turning Shut-off Switch To Off Position To Eliminate Voltage Spikes That Could Damage Ignition Components.







