
Share on:
Follow the instruction to assemble the product, press the ON/OFF button before use. You should see the LEDs light on and the pump runs for a few seconds then they stop( the battery should contains less electricity, because of its non-water protection function it it will stop working), in this way you can confirm if the switch is on the ON position. After the pump is put in the water and the water is filled on the casing fully, the pump should start to work. Product Specification: Solar Panel: 3.5W Battery: Li-ion 18650 3.7V/1800mah Maximum quantity of flow: 53GPH / 200L/h Water Pump Cord Length: 10ft / 3m Solar panel size: 10.4 * 7.3 inch Water Pump Size: 1.5"L x 1.42 " w x 1.5" h Daily working time: 16 hours (battery charged for 8 hours) Switch: A.ON/OFF:Power switch B.MODE:Low/High Setting







