
Share on:
PLEASE NOTE:This machine uses design of a constant temperature. It will automatically power-off after reaching a certain temperature to prevent scalding caused by excessive temperature. Use residual temperature to melt the wax, which is more environmentally friendly, energy-saving and safer. It will automatically turn-on after it drops to a certain temperature.HOW TO USE#1: Place the machine on a flat surface andlift up the lid;#2: Put the paraffin wax into the machineand put the lid back on;#3: Connect the machine into the power;#4: Set the temperature to either 140F or167F depending on the wax melting speed, and let the wax melt completely;#5: After the wax has melted, turn off themachine and put the heat insulating grid into the machine;#6: Check for suitable temperature beforeusing the wax with the thermometer;#7: Clean your skin completely before thetreatment;#8: Spread an even layer of wax onto yourhands/the area you’re going to wax and wait for the wax to dry;#9: After the wax has dried, slowly dipyour hands into the melted wax, with your fingers outstretched;#10: Leave your hands in for 20-30 seconds;#11: Relate steps 9 and 10 at least 4-5times until it forms a thick layer on your skin;#12: To help achieve a better effect, wrapyour hands with the glove liner and put on a pair of heat-preservation cottongloves;#13: After 10-20 minutes, take off the glovesand get rid of the liner;#14: Remove the hardened wax from yourhands. ATTENTIONPlease don't add water inside the machineor use water to clean it which will damage itPlease apply a thin layer of wax before useto test if the suitable temperatureIf you feel that the wax temperature ishot, please wait more 10-15 minutes before dipping







