
Share on:
【Automatic irrigation system features】 1. Watering at any time: Water immediately with a single button press on the controller panel without influencing the set watering schedule. 2.Timing watering for plant: Set the Watering and Interval time to your plants' needs. The system will automatically water your set schedule. 3. Battery and USB Power: Power with 4 AA batteries or USB charging cable, such as a phone charger (5V, minimum 1 Amp requirement), the AA batteries will act as a backup during power outages. 4. Save water and time: Automatic drip kit uses 70% less water than traditional spray & drip heads, by spot watering only exactly where needed. 5. Programming memory: Custom schedules will be retained and programmed watering will resume after power recovery. 【How to install】 1. Cut hose, the length is according to the depth of barrel or bottle. 2. Insert the brass filter into the hose. Then insert the other end of the hose into the input of the controller. 3. Cut hose, the length is according to the distance between the output and the first potted plants. Then use the hose connectors to connect all potted plants. 4. Insert arrow into the hose. 5. Set the Watering and Interval time to your plant's need. The system will automatically water your set schedule. 【Need You Know】 1. Please DO NOT put the reservoir in a position higher than the controller to avoid causing SIPHON EFFECT. 2. The water timer is not water-proof, Please do not use it outdoor directly. 3. If the plant is big, please put more than one drippers to get enough water. 4. Soaking the tubing in the hot water minutes or apply little vegetable oil to the end of the hose will easy installation. Please make sure of all spikes are deep into the tubing as they can go. 5. Please DO NOT mount the water source higher than the plants or you will come home to a flooded situation and waterlogged plants.







