InnoGear Webcam Stand, Suspension Boom Scissor Arm Stand for Logitech Webcam BRIO C920 C920S C922 C922x C925e C930 C930e, 1/4"-3/8" and 3/8"-5/8" Screw for Blue Yeti Snowball Yeti Nano and Other Mics : Electronics

Description

The stand base is rotative in 360°. Simply scew the table mounting clamp tightly onto the upright and roursquare surface of the desk, and tighten the screw for better control of the direction. Then you are ready to use the stand in all directions. The max load bearing capacity of the stand is 3.3 lb with the default set. But the bearing capacity can be lifted up 4.0 lb if you set the spring to the second hole. The heavy duty stand will hold your microphone or webcam tighly without dropping or shaking. Unlike the microphones on the market that have knob getting in the way when folded together. InnoGear microphone stand is upgraded with extended struction to avoid such issue. Freeing you the concern of causing the spring deformed and loss of elacisity. Use the included screws (1/4" to 3/8", 3/8" to 5/8") to screw your mic onto the stand. Perfect for Blue Yeti, Yeti Pro, Yeti Nano, Yeti X, Snowball iCE, Blue Snowball, Audio-Technica AT2020/AT2020USB+/AT2035, Rode NT-USB/NT1-A, Fifine K669B, BM-800, NW-700, Razer Seiren X/Seiren Elite, HyperX QuadCast, Samson C01/G-Track Pro, MXL990/MXL770 and etc. InnoGear stand with 1/4" screw is suitable for logitech webcam: BRIO C920 C920S C922 C922x C925e C930 C930e C615 C960 etc (expect for logitech webcam C270 C310). Other devices with the standard 1/4" screw hole is also compatible. Use the included 1/4" to 3/8" screw adapter and mic clip to connect your dynamic microphone to the the arm stand for vocal audio performance. Suit for Shure SM48/SM57/SM58/SM7B/PGA48, Samson Q2U, ATR2100x-USB/AT2005USB, Behringer Xm8500 and etc.

Product Overview