
Share on:
Once leaking gas is detected, the beep frequency will increase. The more gas leaked, the quickly the buzzer beeps. The first indicator will flash quickly meantime and the other four LEDs will light up accordingly based on the concentration of leaked gases. The first indicator indicates both leak and battery level. Blinks in orange mean low battery. It will respond to all halogenated. This includes, but is not limited to: CFCs e.g.R12, R11, R500, R503 etc. HCFCs e.g. R22,R123, R124,R502 etc. HFCs e.g. R134a, R404s, R125, R1234yf etc. Blends such as AZ-50. HP62. MP39 etc. 1-7 Grade selectable sensitivity Maximum sensitivity is 0.21oz/yr smaller leak, higher sensitivity grade More refrigerants, more rapidly beeps, faster indicator flashes Note: 2 beeps per second when the detector is open, 10 beeps per second when leak is detected) LED light flash alarm Buzzer alarm Dual-battery indicators Green-the battery voltage is normal, suitable for the job. Orange-the battery voltage is close to the limit work, need to be replaced asap. Around 7.87-inch flexible probe Allows detection in difficult and hard-to-reach areas. Replaceable sensor tip, which makes the detection more accurate. Battery life: about 50 hours Leak Detector equips with: Compact design Portable black bag to carry and storage Note: batteries NOT included User Guide: Leaking areas are usually covered with contaminants such as compressor oil or dirt, so be careful not to let the sensor tip come in contact with these contaminants. Keep the sensor tip away from any moisture or other solvents to avoid false alarms. Package List: 1 x Detector 1 x Carry Bag 1 x User Manual





