LLPT Double Sided Tape Black Acrylic Strong Mounting Tape 1 Inch x 550 Inch Multiple Sizes Residue Free Waterproof Outdoor Indoor Adhesive (BA150) : Office Products

Description

The surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended. 1. Clean the surface as per application guidelines and keep it dry. 2. Pinch and stretch a corner of the adhesive until the backing liner lifts from the tape for easier liner removal; LLPT has upgraded backing with white oil paper, easy to peel and install. 3. Cut the right size you want and stick it on the surface of object, if you are going to mount over size and heavy object, let the tape cure for at least 12 hours to create a secure bonding first and then stick to the wall. 4. Give a HARD PRESS if you are sure about the position to objects and wall. 5. For some surface if the tape does not work, spray Adhesion Promoter first then stick the tape. Short Term: (minutes, hours) 300°F (149°C) Long Term: (days, weeks) 250°F (121°C) Easily handling the heat in car at sumer season, working under direct sun and performing the same bonding strength under high watts LED strip lights. Excellent water and moisture resistance once the curing process is done, which taken 24 hours. BUT DO NOT stick the tape onto any wet and oil surfaces for initial application, these environmental conditions affect the bonding strength or even weaken the performance; always CLEAN & DRY surfaces first. Peel Adhesion: 17 lb./in. width (350 N/100 mm) based on stainless steel. Normal Tensile: 85 lb./in.2 (620 kPa) based on aluminum T-block. Dynamic Shear: 85 lb./in.2 (620 kPa) based on stainless steel.

Product Overview