
Share on:
For disinfection, we recommend using aerosol disinfectant. 1. Add atomized disinfectant solution, mix a certain proportion of water according to the instructions of the disinfectant solution. 2.Connect the machine to the power supply and plug it into a grounded electrical outlet and turn the switch on . 3.First warm-up need 2-3 min, when the heating is complete the light is Green,it will not be on while preheating . It can spray 12-30s, preheating again only need 50-60s,the same spray for 12-30 seconds. (Produce smoke while keep pressing) Cautionary Note: 1.We recommend using a fogging solution.The fluid supported by the fog machine is oil-based fog fluid. 2.Do not use alcohol as a consumable for sterilization; it can cause a fire when heated. 3.If you can't find the disinfectant fogging solution, look for a disinfectant with Ethyl Alcohol and Polyhydirc Alcohol as the main ingredients. 4.People should leave the disinfection area while the fog machine is being disinfected. 5.Away from the Fire 6.Reasons for not producing fog: i: The purchased mist solution is not compatible with the equipment. ii:The proportion of water is too high.







