Gas Pressure Regulator, GASLAND Chef 1/2" NPT In/Out Gas Pipe, 1/2 PSI(3.5 kPa) Gas Inlet LPG10"WC. & NAT5"WC. Gas Pressure Regulator for Liquefied Propane and Natural Gas, Easy To Install: Home Improvement

Description

Gasland chef gas pressure regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment.PRODUCT DESCRIPTIONBrand: Gasland chef Gas type: Natural Gas (NG)  Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar)  Outlet pressure range: 3” - 6” Water ColumnAmbient operating temperature range: 32°F - 225°F (0°C - 107°C) Refer to the pictures on how to find the correct pipe thread size. This regulator has 1/2" openings for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying.ATTENTIONNOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GASThe pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standardsInstall the regulator properly with gas flowing as indicated by the arrow on the casting *NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulatorKINDLY NOTEWARNING: The NPT thread size is NOT referring to the size of the thread itself! The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipeMeasuring the pipe will often mislead you into choosing the wrong pipe sizeThe "pipe thread size" is measured and based on the inside of the pipeA lot of people measured the thread / the opening for the thread/outside diameter！

Product Overview