YOSUN 1020991 Replacement Projector Lamp for SmartBoard Unifi70 Unifi70w UF70 UF70w LIGHTRAISE 60WI2 SLR60wi2 SLR60wi2-SMP SB600i6 Projector Lamp Bulb with Housing : Office Products

Description

Bulb model: 1020991 Bulb wattage: 280w Working hours: 3500-4000 hours Period: 180 days Bulb Type: Bulb with shelf Applicable models:   UF70          UF70w         Unifi70 Unifi70w    SLR60wi2     SLR60wi2-SMP LIGHTRAISE 60WI2   1020991 projector lamp performs the high definition pictures like you are at the cinema. It is an effective replaced item which you really touch feeling at . Durable lamp life,more clear pictures makes you feel no negative effects on operating and matching your projector. With a economical and healthy conditon when you are using it. This is a lamp with housing, very easy and covenient for intalling. We also offer you simple intallation guide in our product detailed description. We always be here to assist you when you got any probems. Please do remind us as your first assistant. Note: 1. Let the lamp cool before replacing it. If the lamp breaks, handle the shards carefully to avoid injury. 2. Do not touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 3. Be sure to seat the lamp fully and secure the lamp cover. If the lamp is not properly installed or the cover is loose, the lamp will not turn on.   Projector Lamp Description and Service: 1.  YOSUN 100% new replacement Projector lamp bulb with same functioning as your original one. Perfectly match and compatible for your Projector. 2.  It is the lamp with housing, not only a bare bulb. Same as bright and durable lamp wick as the original bulb. Outputting high definition pictures as you expected. With outstanding imaging technique. 3.  All our projector lamps have taken strict quality checks for beam performance, connections, voltages, and run-time, so you can trust it to work flawlessly in your projection. 4.  Furthermore, we will provide a 150-day of after service , If you have any technical, damaged, or other problem ,please contact with us asap , we will try our best to help you. Tips: The projection lamp typically lasts for about 3500 hours of use (in high brightness mode) or 4000 hours (in low brightness mode). It is time to replace the lamp when: 1. The projected image gets darker or starts to deteriorate. 2. The lamp light is flashing orange. 3. The message Replace the Lamp appears on the screen when the lamp comes on. To maintain projector brightness and image quality, replace the lamp as soon as possible. 4. Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.   steps to replace the lamp: 1. Press the Power button twice to turn off the projector. When you hear the projector beep twice, unplug the power cord. allow it projector cool down for at least an hour. 3. Use the screwdriver included with the replacement lamp to loosen the screw holding the lamp cover. Slide the cover out, then lift it off. 4. Use the screwdriver to loosen the two screws holding the lamp in place. Hold the lamp as and pull it straight out. Gently insert the new lamp along the guide rail. 5. If it doesn’t fit easily, make sure it’s facing the correct way. Once the lamp is fully inserted, tighten its screws. Lower the lamp cover into place.Then slide the cover closed and tighten the screw.

Product Overview